Lt301 Fsuper Abrasion Resistant Frac Hose for Water-Based, Oil-Based, Acid-Based Under High Pressure in Acid, Sand and Hydraulicfracturing Works

Product Description

Product Description

LT301 F

SUPER ABRASION RESISTANT FRAC HOSE

Application:Flexible line using for delivery water-based, oil-based, acid-based and foam fracturing fluids underhigh pressure in acid,sand and hydraulicfracturing works.

 

Inner Tube:UPE and sythentic rubber

Reinforcement:multi-spiraled high tensile super flexible steel wire

Outer Laver: abrasion and weather resistant synthetic rubber:

Temperature Range:-29°C~+100°C(-20°F~+212°):

Connector: integral union ,integralflange, or other connector types:

Product Parameters

Size	I.D.	O.D.	W.P.	P.P.	Min.B.R.		W.T		Volume		Connector W.T		Connections
inch	mm	mm	psi	psi	m	ft	kg/m	lb/ft	bbl/min	m³/min	kg	lb/set
2"	32	81	15000	22500	1.2	3.94	11.5	7.7	4.5	0.72	30	66	2 "FIG1502 hammer connected by Wang or 2 1/16" 15KAPI flange 2 "FIG 1502 Hammer Union or 2 1/1615K APIfange
	44	95	15000	22500	1.4	4.59	18	12	9	1.46	53	117	3 "FIG1502 hammer connected by or 3 1/16" 15KAPI flange 3 "FIG 1502 Hammer Union or 3 1/1615KAPIflange
	51	107	15000	22500	1.4	4.59	20	13	12	1.91	55	121
2.5"	58	122	15000	22500	1.5	4.92	24	16	15	2.39	57	126
	64	126	15000	22500	1.5	4.92	27	18	18.5	2.90	58	128
3"	69	135	15000	22500	1.6	5.25	30	20	21.5	3.42	60	132
	76	145	15000	22500	1.6	5.25	35	24	26	4.13	65	143
4"	89	164	15000	22500	2.0	6.56	52	35	36	5.72	75	165	4 "FIG1502 hammer connected by Wang or 4 1/16" 15KAPI flange 4 "FIG 1502 Hammer Union or 4 1/16" 15KAPIfang
	102	179	15000	22500	2.0	6.56	60	40	47	7.47	85	187
5"	120	208	15000	22500	2.1	6.89	80	54	65	10.34	343	756	5 1/8 "15KAPI flange connection 5 1/815KAPIfange
	127	216	15000	22500	2.1	6.89	86	58	73	11.61	348	767
5.5"	140	243	15000	22500	2.2	7.22	110	74	88.5	14.07	560	1235	7 1/16 "15KAPI flange connection 7 1/16 * 15KAPIfange
6"	152	255	15000	22500	2.3	7.54	125	84	104.5	16.62	680	1499
2"	51	112	20000	30000	1.5	4.92	26	17	12	1.91	65	143	2 "FIG2002 Hammer Hammer Connection by Wang or 3 1/16" 20KAPI Flange 2 "FIG 2002 Hammer Union or 3 1/16" 20KAPIfang
2.5"	64	133	20000	30000	1.6	5.25	36	24	18.5	2.90	78	172	3 "FIG2002 hammering due to or 3 1/16" 20KAPI flange connection 3 "EIG2002HammerUnion or 3 1/1620KAPIflange
3"	76	159	20000	30000	1.9	6.23	57	38	26	4.13	98	216	3 "FIG2002 Hammer Union or 3 1/16" 20KAPI Flange Connection 3 "FIG 2002 Hammer Union or 3 1/16" 20KAPIflange
4"	102	202	20000	30000	2.1	6.89	94	63	47	7.47	400	882	4 1/16 "20KAPI flange connection 4 1/1620KAPIfange
5"	127	230	20000	30000	2.3	7.54	111	75	73	11.61	850	1874	7 1/16 "20KAPI flange connection 7 1/1620KAPIfange

Packaging & Shipping

 

 

International Exhibition

 

 

 

Application Scenario

 

 

 

Company Profile

 

State-of-the-art rotary drilling hose at an affordable price
 Letone Hydraulic Technology Co., Ltd., located in Henan Province, China, has developed into a strong competitor in the production of drilling rotary hoses in oilfield drilling rig systems. Thanks to more than 20 years of hard work, our rotary/drilling hoses have been widely accepted by distributors and contractors all over the world including the United States, Mexico, Brazil, South Africa and other countries and regions.

Provide oilfield rubber hose and end fittings
Flexible drilling rubber hose plays an important role in oil extraction. They should withstand high operating pressures, extreme operating temperatures, wear and other inferior elements. The maximum working pressure for steel cable strength members is up to 15,000 psi. The steel wire is usually galvanized or copper plated to improve the resistance of the steel wire to rust and corrosion. Since the rebar is thick, the hose should be handled or stored in the correct way to avoid kicking or pinching. They will greatly reduce their rated working pressure.

 

Certifications

 

            As an experienced professional hose manufacturer, Letone has obtained the Safety Certificate of Approval for Mining Products, certificate of MSHA, API Type Approval (API 16C and API 7K), ABS Type Approval (Drilling Equipment and Flexible Wire Braided Rubber Hose Assembly), GOST certificate, Lloyd's Fire Test Certificate and meets the requirements of quality management systems such as ISO14001:2015, ISO9001:2015, API Q1, IATF 16949:2016, etc. Letone also holds the environment management system international certification issued by IMS (comply with ISO14001:2015 standard). The Letone Testing Center has obtained the Laboratory Accreditation Certificate issued by CNAS in 2016. There are more than 20 laboratories include impulse test laboratory, burst test laboratory, fire test laboratory, salt spray laboratory, etc. The testing report is identified as objectivity, accuracy and authority.

Success Case

 

  

New high pressure hydraulic hose replaces rubber hose in oil and gas applications

Products used in the rigorous oil and gas industry must be resilient and of high quality to properly support these complex operations. Hoses and connections must be safe, versatile and efficient. Rubber hoses have their limitations when used in harsh environments. One of the problems is bubbling of the inner tube. Foaming is caused by fluid seeping into the rubber core tube over time. When the pressure is released quickly, the fluid will try to escape quickly and damage the rubber core tube, causing blisters, which in turn cause leak paths in the core tube. Letone Hydraulics has developed high pressure hoses specifically for subsea applications. The core tube is made of nylon, time- and field-proven for use in subsea applications, and chemically compatible with subsea control fluids.

 

Offshore Drilling Mud Hose

Slurry hoses are bulk delivery hoses for the offshore oil and gas industry. For transfer from shore to ship and onboard installation of drilling fluids, including most fluids used in hydrocarbon drilling operations. Especially those containing large amounts of suspended solids, emulsified water or oil and all types of water-based, oil-based and synthetic-based drilling fluids. Drilling, completion and workover fluids sometimes referred to as muds, although essentially free of solids, are not strictly believed to be successfully used with this hose.

 

More Products

 

1,Question: What are your hose products?
Solution: The main material of our hoses is rubber. In order to cope with different hose usage conditions, there will be different hoses, such as high temperature resistant steam hoses, corrosion resistant chemical delivery hoses, ultra-high pressure cleaning hoses, Petroleum drilling hoses, etc.
2,Question: What certificates do you have?
Solution: Each hose we produce has obtained corresponding certificates, especially ISO and ABS system certificates, which is the recognition of our production capacity.
3,Question: How long is your lead time?
Solution: Usually the delivery period is 15 days
4,Question: How long is the service life of your hoses?
Solution: Different hoses have different service life, but the hoses we produce are relatively long-life hoses on the basis of standards